• Check the refrigerant charge including suction line pressure and liquid Line pressure
• Take the TD across the coil including return air temp and supply air temp
• Look for signs of a refrigerant leak
• Test the capacitors
• Look at the contactor
• Test the incoming line voltage
• Inspect the wiring
• Test the relays and switches
• Test the pressure switches
• Blow out the drain line
• Check all motor amperages
• Inspect the equipment disconnect
• Remove leaves and debris
• Rinse the condenser coils
• Check the drain for proper fall
• Proper float switch operation
• Check the secondary drain pan
• Inspect the evaporator coil
• Look at the return air filter
• Check operation of the thermostat
• Inspect the duct system
• Insure there are no code violations
• Check IAQ products
• Clean and/or check the gas burners
• Check the igniter for proper resistance and function
• Clean the flame sensor/thermocouple
• Check the blower motor amps and speed
• Evaluate the temperature rise
• Inspect the heat exchangers
• Check for proper combustion
• Clean out and inspect the pressure switch tubing
• Evaluate the pressure switch operations
• Make sure that the flue gasses are venting properly
• Test all of the limit and roll out switches
• Inspect the gas pipe plumbing
• Set manifold gas pressures
• Check the gas input rate
• Inspect all of the wiring
• Make sure that there are no code violations
• Check the safety interlock switch
• Test the combustion fan motor and check amps
• Make sure that there is proper combustion air
• Inspect the duct system
• Perform a carbon monoxide test
• Check IAQ products
• Check the refrigerant charge
• Check the temperature rise across the coil
• Inspect the coils for cleanliness, leaks, or deficiencies
• Test the defrost cycle
• Make sure the reversing valve is working properly
• Test the auxiliary heat staging
• Check the emergency heat operation
• Test and inspect the thermostat operation
• Check the capacitors
• Inspect the contactor switch
• Test the relays, switches, and control board
• Perform a visual check for refrigerant leaks
• Test the fan motor amperage
• Check the filtration system
• Test the compressor motor amperage
• Tighten the electrical connections
• Observe the circuit breaker sizing
• Insure proper insulation on the refrigeration lines
• Test the incoming line voltage
• Test the pressure switches
• Inspection of all exposed gas lines for leaks
• Water pressure checks in piping and fixtures
• Inspection and flush of Water Heater to ensure proper operation and efficiency
• Inspection of all exposed and under the sink piping for leaks or corrosion
• Inspection of all bathroom water/plumbing fixtures for proper operation
• Inspection of all kitchen water/plumbing fixtures for proper operation
• Inspection of all laundry water/plumbing fixtures for proper operation
• Inspection of all sink and sewer drains for proper drain flow
• Inspection of emergency shut-off valves for proper operation
• Inspection of outdoor Hose Bibbs
• Inspection of Water Softener and any water treatment systems to ensure proper calibration and efficiency
Celebrating 20 Years of Business in 2005.
For two decades, we’ve built our reputation on quality craftsmanship, fair pricing, and treating every customer like family. Our team of specialists is committed to providing expert installations, repairs, and maintenance with care and precision.
We believe in honesty, integrity, and putting people first. Our approach is simple: offer fair, transparent pricing, provide expert recommendations without unnecessary upsells, and treat every home as if it were our own. We take pride in building relationships that last, delivering the reliable service you deserve.
At Wind Bender Heating Cooling Plumbing, we understand how crucial a functioning air conditioning system is to your comfort, especially during the hot summer months in Dayton, Ohio. Our expert technicians are highly trained and equipped with the latest tools and technology to provide top-notch air conditioning repair services. Whether your AC unit is making strange noises, not cooling properly, or has stopped working altogether, we can diagnose and fix the problem efficiently. We take pride in our prompt, reliable service and our commitment to ensuring your home stays cool and comfortable.
When it comes to air conditioning repair in Dayton, Ohio, Wind Bender Heating Cooling Plumbing stands out as the trusted choice for homeowners and businesses alike. Our team is dedicated to providing exceptional customer service and high-quality repairs that extend the life of your air conditioning system. We offer competitive pricing and transparent quotes, so you know exactly what to expect. Don’t let a broken AC ruin your day—contact us today for fast and effective air conditioning repair services in Dayton, Ohio, and experience the Wind Bender difference.
Thank you for your interest in working with our team! Please fill out the following form and one of our team members will reach out asap about your home. We’ll make sure everything is taken care of—no stress, no surprises!
Wind Bender Heating Cooling Plumbing LLC
OH Lic# 38289 HVAC, Refrigeration, Plumbing